Psychotiller | Electrical Longboard Supply | California

Single RKP mount

100 USD
Single RKP mount
Click on image to view full size

Single RKP mount

100 USD
Single RKP mount. Including four 90mm axles, and four 10mm spacers and 4 M6 stainless hex screws.  These can also be reverse mounted depending on your motor size and hanger width.

Mounting requires a drill with a 5mm bit and a 6mm tap. You use the mount as the drill guide. Just put all of the spacers on the axle and screw it through the mount into the hanger until the mount is pressed square into place. Then drill one side, flip it and drill the other. Take the mount off, tap the 6mm threads into the hanger and put it all back together. 10 minutes per mount. 

We recommend using the 176mm hangers. The 200mm hangers with this set up are WIDE!!! Mountainboard wide. Hmmm...Maybe somebody could set up a mountainboard with some real trucks?! All you would need to do is wedge the trucks...I'm rambling